IBM P70 / P75 replacement hinges

Description

If you have an IBM P70 / P75 then you probably have a lopsided screen due to a broken hinge.  These hinges are for P70 models with s
erial numbers xxxx50001 or later (system board will be either 56F9084 or 56F9085) and P75 models.
What is included in this auction:
Left 3D printed in ABS plastic hinge
Right
3D printed in ABS plastic hinge
4 screws
4 nuts
2 washers
Installation instructions
There is a bit of effort required to replace these hinges as IBM decided to use rivets to fasten the hinges together.  A step bit makes easy work of removing the rivets.  The HMM available online shows how to remove the screen.  I used the opportunity when replacing mine to perform a thorough cleaning.  I disconnected the power supply, removed the motherboard, and then at the bottom of the front of the metal hinges there are two screws to remove (one on each side).  After unscrewing those the screen slides upwards and off of two hooks holding it in place.  From there you remove 4 screws holding the monitor onto the hinges.
There are 3 parts to each hinge.  The first is the metal part that connects to the screen, the second is the metal part that connects to the case, and the third is what is included in this auction, the plastic piece that connects the two metal pieces together.
If you have any questions please reach out.
Fast Priority Mail shipping from Connecticut.
Check out my other auctions if you are looking for other options, including:
SD to IDE carriers
2.5" (44 pin) SD to IDE adapter, carrier, or adapter with carrier:  https://www.ebay.com/itm/303603128629
3.5" (40 pin) SD to IDE adapter, carrier, or adapter with carrier: https://www.ebay.com/itm/303551644199
5.25" (40 pin) SD to IDE carrier or adapter with carrier: https://www.ebay.com/itm/303572218410
PCI bracket for 3.5" SD to IDE (40 pin) adapter:  https://www.ebay.com/itm/303596143604
PCI bracket with 3.5" SD to IDE (40 pin) adapter:  https://www.ebay.com/itm/303596155608
SD to SATA carriers
3.5" SD to SATA carrier:  https://www.ebay.com/itm/303626443059
PCI bracket for 3.5" SD to SATA adapter:  https://www.ebay.com/itm/303626443059
MicroSD to IDE carriers
3.5" (40 pin) microSD to IDE adapter, carrier, PCI bracket with adapter, or adapter with carrier:  https://www.ebay.com/itm/303610388930
PCI bracket for 3.5" (40 pin) microSD to IDE adapter:  https://www.ebay.com/itm/303610395976
MicroSD to IDE board:  https://www.ebay.com/itm/303628777382
Compact flash to IDE carriers
3.5" (40 pin) Single or Dual CF to IDE adapter with carrier: https://www.ebay.com/itm/303591855018
PCI bracket with Single or Dual 3.5" CF to IDE (40 pin):  https://www.ebay.com/itm/303599104175
SATA to PATA carrier
5.25" drive bay for 2.5" SATA drives to PATA / IDE:  https://www.ebay.com/itm/303717734405
3.5" / 5.25" Floppy Disk Cleaner
https://www.ebay.com/itm/303620862566
Reach out if you'd like another color; if I can obtain the filament I can print it.  Let me know if there is another style or component you are looking for, I can create custom parts.  Thanks!